TEMP1

Van's sells avionics packages for the ELSA RV-12iS via this form. If you are building EAB, you may also place your order here, assuming you are ordering one of our standard packages. Note that SLSA customers should order their avionics through the SLSA sales ordering process.

For avionics kit orders, you may make your required 25% deposit with a credit card. The remainder of the payment must be made via check, money order or wire transfer.

Important Shipping Information:

Shipping within the continental United States is included in the avionics kit prices displayed here.
Lithium batteries in the Avionics Kit are considered 'hazardous materials' for the purpose of shipping regulations. These items will be shipped separately and as a result may incur additional shipping/handling charges. This is determined on a case-by-case basis and will be communicated to you by Van's.
Note to overseas customers: The cost of shipping to locations other than the continental USA will be determined after the order is received, and those charges will be billed directly to you by Van's avionics kit partner SteinAir.
Certain countries regulate and/or prohibit the shipment of lithium batteries used in the ELT and avionics backup power systems. Van’s is not allowed to ship these batteries to some countries (e.g. New Zealand, South Africa). In these cases, the cost of the affected components will be credited, and builders will be required to source these components from local vendors, or use substitute components.

When you complete this order form and submit it, our Kit Order Department will receive the information and contact you to arrange any details, as well as collection of your deposit. They'll be able to help you with any questions.

Which engine are you installing on your aircraft?*

The RV-12iS can be configured with either the fuel-injected Rotax 912 iS Sport (most common), or the carbureted Rotax 912 ULS.

If ordering the ULS engine, you may only order the Dynon avionics suite.

We need to know which engine you're installing in order to properly build and configure your panel and instruments.

Rotax 912 iS Sport (fuel injected)
Rotax 912 ULS (carbureted)

First Question: Which brand avionics package are you ordering?*

You'll choose your specific package options in a few minutes. To start, we just need to know what brand avionics you're installing in your RV-12iS: Dynon or Garmin?

NOTE: If you are installing a Rotax 912 ULS engine, you must order the Dynon avionics package.

Dynon Skyview HDX
Garmin G3X Touch
Garmin G3X Touch - IFR Package

Garmin G3X IFR Package for RV-12iS

Includes:

Two EFIS screens
GTN-650Xi certified IFR GPS/NAV/COM navigator/radio
ADS-B Out
Autopilot servos for pitch and roll
GMC 507 autopilot control panel
Finished, powder-coated panels with silk-screened placards
All of the parts/hardware/wiring required to install the system

Options:

ADS-B In and Sirius XM receivers

Note that the current Light Sport Aircraft standards (ELSA and SLSA) preclude operation in Instrument Meteorological Conditions (IMC). While aircraft licensed under the LSA standard may be operated "in the system" under Instrument Flight Rules, such as in a training environment, certification as LSA currently prohibits IMC operations. Also, note that EAB-licensed aircraft are not restricted in this fashion.

This package is available only for RV-12iS aircraft equipped with the Rotax 912iS Sport engine. The 912 ULS engine does not deliver the electrical capacity required to support this package.

Price:

Garmin G3X Touch System Package - COM Radio Selection*

Specify which COM radio you require for your installation. Van's provides a Garmin GTR200B COM radio for installation in the USA and countries where 25kHz channel spacing is standard and a TSO'ed radio is not required.

If your country of registration/operation requires either 8.33kHz channel spacing -or- a TSO'ed radio, choose the Trig TY96 COM radio option.

Both the Garmin GTR200B and the Trig TY96 include a built-in stereo intercom.

G3X Package with Garmin GTR200B + $18,775.00
G3X Package with Trig TY96 (INTL) + $18,950.00

Dynon Skyview HDX System Package - COM Radio Selection*

Please specify which COM radio you require for your installation, and we will start configuring your avionics kit package. Van's provides two COM radio options, each with a different specific application:

The Garmin GTR200B COM radio is specified for installation in the USA and other countries where 25kHz channel spacing is standard and a TSO'ed radio is not required.
If your country of registration/operation requires either 8.33kHz channel spacing -or- a TSO'ed radio, you must choose the Trig TY96 COM radio option.

Both the Garmin GTR200B and the Trig TY96 include a built-in stero intercom.

SkyView HDX Package with Garmin GTR200B + $17,950.00
SkyView HDX Package with Trig TY96 (INTL) + $18,100.00

Dynon Dual-Screen EFIS Option

The standard Dynon HDX avionics package includes a single EFIS screen (PFD), which is installed on the pilot's side of the instrument panel. You may choose to add a second EFIS (MFD) screen to your RV-12iS panel, which is located on the passenger/right side of the panel when installed. We will select the correct instrument panel materials to match your choice of installed equipment.

Single Screen (standard)
Add second EFIS screen + $3,995.00

Garmin Dual-Screen EFIS Option

The standard Garmin G3X avionics package includes a single EFIS screen (PFD), which is installed on the pilot's side of the instrument panel. You may choose to add a second EFIS (MFD) screen to your RV-12iS panel, which is located on the passenger/right side of the panel when installed. We will select the correct instrument panel materials to match your choice of installed equipment.

Single Screen (standard)
Add second EFIS screen + $3,995.00

Add Garmin Autopilot Servos?

This option includes two GSA 28 "smart" autopilot servos, which are controlled by the G3X Touch system.

No Autopilot
Add Autopilot Servos + $1,750.00

Add Garmin Autopilot Control Panel?

This option adds a Garmin GMC 507 Autopilot Control Module, which is a button panel that is installed in the instrument panel of the RV-12iS. Note that to order our powder-coated and silk-screen placarded panel you must also order this option. Builders who choose not to install this option can order our standard blank, pre-cut panels.

No AP Control Panel
Add GMC 507 Autopilot Controller Panel + $1,350.00

Add Dynon Autopilot Servos?

This option includes two Dynon autopilot servos, which are controlled by the Dynon HDX system.

No Autopilot
Add Autopilot Servos + $1,615.00

Add Dynon Autopilot Knob Control Module?

This option adds a Dynon Autopilot Knob Module, which is a knob/button panel that is installed in the instrument panel of the RV-12iS. Note that to order our powder-coated and silk-screen placarded panel you must also order this option. Builders who choose not to install this option can order our standard blank, pre-cut panels.

No Autopilot Controller
Add Dynon AP Knob Module + $950.00

Dynon Panel Finish Options - Dual Screen

Your dual-screen installation's instrument panels can be ordered either as standard pre-cut blank panels (which you finish in your choice of paint and labeling/placarding) or optionally as fully-finished, powder-coated panels with silk screened placards already in place.

Note that the powder-coated/silk screened panels are delivered with cut-outs already in place for the Dynon AP Knob Module. You can install a panel blank on the back side of the instrument panel cutouts if you are not installing the AP Knob Module set.

Unfinished instrument panel (Dynon dual)
Powder coated panels with silk screened placards (Dynon dual) + $650.00

Garmin Panel Finish Options - Dual Screen

Your dual-screen installation's instrument panels can be ordered either as standard pre-cut blank panels (which you finish in your choice of paint and labeling/placarding) or optionally as fully-finished, powder-coated panels with silk screened placards already in place.

Note that the powder-coated/silk screened panels are delivered with cut-outs already in place for the Garmin GMC 507 AP Control Panel. You can install a panel blank on the back side of the instrument panel cutouts if you are not installing the GMC 507 AP Control Panel set.

Unfinished instrument panel (Garmin dual)
Powder coated panels with silk screened placards (Garmin dual) + $650.00

Hidden

Powder-Coated Garmin IFR Instrument Panel (included)

Your IFR Garmin avionics kit is a dual-screen installation, and the instrument panels are delivered as fully-finished, powder-coated panels with the required silk-screened placards already in place.

Powder coated panels with silk screened placards (Garmin dual - included)

Dynon Panel Finish Options - Single Screen

Your single-screen installation's instrument panels can be ordered either as standard pre-cut blank panels (which you finish in your choice of paint and labeling/placarding) or optionally as fully-finished, powder-coated panels with silk screened placards already in place.

Note that the powder-coated/silk screened panels are delivered with cut-outs already in place for the Dynon AP Knob Module. You can install a panel blank on the back side of the instrument panel cutouts if you are not installing the AP Knob Module set.

Unfinished instrument panel (Dynon Single)
Powder coated panels with silk screened placards (Dynon Single) + $600.00

Garmin Panel Finish Options - Single Screen

Your single-screen installation's instrument panels can be ordered either as standard pre-cut blank panels (which you finish in your choice of paint and labeling/placarding) or optionally as fully-finished, powder-coated panels with silk screened placards already in place.

Note that the powder-coated/silk screened panels are delivered with cut-outs already in place for the Garmin GMC 507 AP Control Panel. You can install a panel blank on the back side of the instrument panel cutouts if you are not installing the GMC 507 AP Control Panel set.

Unfinished instrument panel (Garmin Single)
Powder coated panels with silk screened placards (Garmin Single) + $600.00

Dynon ADS-B In Option

You may choose to configure your Dynon SkyView HDX system with ADS-B In capability (free traffic and weather data). Includes Dynon ADSB-472 receiver and all associated hardware/components/wiring.

No ADS-B In
Add ADS-B In capability + $890.00

Garmin ADS-B In and Sirius XM Radio Options

You may choose to configure your G3X Touch system with ADS-B In capability (free traffic and weather data), and can optionally add Sirius XM Radio recever (subscription required for satellite audio programming and/or weather data). Both options also include Garmin Connext capability. Sirius XM radio services are available in the USA only.

No ADS-B In or Sirius XM
Add ADS-B In capability + $950.00
Add ADS-B In and Sirius XM Receiver + $1,805.00

Garmin ADS-B In and Sirius XM Radio Options - IFR Package

You may choose to configure your IFR G3X Touch package with ADS-B In capability (free traffic and weather data), and can optionally add Sirius XM Radio recever (subscription required for satellite audio programming and/or weather data). Both options also include Garmin Connext capability. Sirius XM radio services are available in the USA only. The IFR package enabling Sirius XM radio includes an antenna shared by the GTN 650 and the satellite radio receiver.

No ADS-B In or Sirius XM
Add ADS-B In capability + $950.00
Add ADS-B In and Sirius XM Receiver + $1,805.00

Mode-S 24-bit HEX code for non-US aircraft

For builders outside the USA, we will need to program your ELT with the HEX (mode-S) code asigned by your country's registration authority, prior to shipping. Note that US-based customers will register their own ELT prior to first flight, and do not need to provide this information.

Hidden

CUSTOMER INFORMATION

Name*

First Last

Customer/Builder Number*

This number is assigned with the empennage kit.

Mailing Address*

Street Address Address Line 2 City State / Region ZIP / Postal Code Country

Ship to You or Will-Call

Please let us know whether we will be shipping the avionics kit to you, or if you will be picking it up at the Van's factory (will-call)

Ship to Me
Will-Call (pick up at Van's)

Use my mailing address as the shipping address

Shipping Address*

Street Address Address Line 2 City State / Region ZIP / Postal Code Country

Day Phone

Evening Phone

Fax

Email Address*

Method of Payment for Deposit*

Please indicate which method of payment you wish to use when submitting your 25% kit deposit. A member of our Kit Order Team will assist you in completing the actual deposit process.

Note that the remaining balance of Avionics Kit orders must be made via check, money order or wire transfer and must be received before the product can be shipped. We are unable to accept credit cards for the balance on this kit.

Do we have your card number on file?

If you've asked us to keep your credit/debit card number on file and want us to charge that card for your deposit, please enter the last 4 digits of your card number below. If not, just leave it blank.

PLEASE READ AND INDICATE YOU AGREE TO THE TERMS BELOW*

Kit prices are those which are in effect the day the order is received.
A standard 25% deposit must accompany kit orders. The deposit is calculated based on standard kit prices before changes/deletions.
Customer-initiated delays may result in price increases commensurate with any published price changes.
Kit order balances must be paid in full before they can be crated and shipped.
A $500.00 non-refundable fee will be charged if an order is cancelled.
Payment shall be made in U.S. funds: check, money order, or Visa/Mastercard/Discover.
Kit/plans orders must be submitted in writing (mail, email or FAX) or via this web-based form.
Prices are ex-works Aurora, Oregon.
Freight charges will be either prepaid or collect, depending on carrier.
Van’s Aircraft, Inc. cannot assist in certifying kits outside the USA. COntact your local jurisdiction for information and assistance.
Prices are subject to change without notice.

By checking the box below, you indicate your agreement with these terms.

I Understand and Agree

Z Order Form: RV-12iS Avionics Kits

CUSTOMER INFORMATION

Order Summary

Z Order Form: RV-12iS Avionics Kits

CUSTOMER INFORMATION

Order Summary

Would you like to try our new online store?