Service Information and Revisions
RV-12iS Safety Directives and Alerts
ID
Date Posted
Applies To
Description
Details
ID
SD-00001
Date Posted
July 8, 2020
Applies To
RV-12 and RV-12iS
Description
Safety Directive: Covers the examination, modification and possible replacement of trim motor units installed for elevator trim control.
ID
SD 19-12-03
Date Posted
December 6, 2019
Applies To
RV-12iS with Rotax 912 iS Sport engines
Description
Safety Directive: Directs owner to Rotax documentation covering mandatory replacement of affected fuel pumps on certain Rotax 912 iS aircraft engines. Note: Supersedes previously published Service Bulletin SB 19-10-11.
RV-12iS Service Bulletins
ID
Date Posted
Applies To
Description
Details
ID
SB 19-08-26 Rev 2
Date Posted
February 24, 2021
Applies To
RV-12/RV-12iS with finish kits shipped before 06-10-19
Description
WD-1201 Nose gear leg replacement - Revision 2 dated 02/24/2021 modifies required-action timeline to be based on parts availability.
ID
SB-00013
Date Posted
December 22, 2020
Applies To
RV-12iS
Description
Inspection and remediation steps described related to potential cracking of exhaust tubes
ID
SB-00023
Date Posted
November 20, 2020
Applies To
RV-12 and RV-12iS aircraft specified in the service letter
Description
Specifies inspection and replacement of WD-1221 Engine Mount Standoff
ID
SB-00006
Date Posted
May 6, 2020
Applies To
All RV models
Description
Potential leaking of Kavlico pressure sensors
ID
SB 20-03-16
Date Posted
March 18, 2020
Applies To
ELSA RV-12iS aircraft with Garmin IFR Avionics Kits
Description
Revision 1: Updated to clarify scope of applicability. Covers inspection of AV-60000 terminals on RV-12iS aircraft, references updated kit assembly instructions pages.
ID
SB 20-01-17
Date Posted
February 5, 2020
Applies To
RV-12 and RV-12iS
Description
Safety Wire Engine Plugs
ID
SB 19-08-16
Date Posted
January 13, 2020
Applies To
RV-12iS with AV-60000/60009 module production dates prior to 9/30/2019; SLSA S/N 12076-12081
Description
Describes steps to inspect and photograph electronic modules on certain RV-12iS aircraft in order to determine whether the soldering of components is correct.
ID
SB 19-10-10
Date Posted
October 22, 2019
Applies To
RV-12iS Powerplant kits delivered prior to Oct 10, 2019 and SLSA aircraft 12076-12080
Description
RV-12iS Fuel system double banjo bolt
ID
SB 19-10-11
Date Posted
October 22, 2019
Applies To
Rotax 912 iS Sport engines listed in the Rotax service bulletin
Description
Rotax Service Bulletin: Fuel Pump Replacement
[Superseded by SD 19-12-03]
ID
SB 19-07-29
Date Posted
August 13, 2019
Applies To
RV-12 and RV-12iS aircraft with certain Rotax 912 ULS engine serial numbers
Description
Notification to RV-12/12iS customers, with Rotax 912 ULS engines and specified ranges of engine serial numbers, of Rotax-issued service bulletin regarding replacement of a circlip on the engine installation.
ID
SB 18-02-03
Date Posted
February 3, 2018
Applies To
All RV-12 aircraft; RV-12iS with earlier tail kit may be affected depending on tail kit ship date
Description
Anti-Servo Tab cracks
ID
SB 18-02-02
Date Posted
February 2, 2018
Applies To
All RV-12 aircraft; RV-12iS with earlier tail kit may be affected depending on tail kit ship date
Description
Potential cracking in the horizontal stabilator front spar
ID
SB 16-08-01
Date Posted
August 1, 2016
Applies To
All RV-12 w/ Emp/Tailcone Kits delivered prior to August 1, 2016; All SLSA RV-12 aircraft delivered prior to August 1, 2016
Description
Stabilator Bearing Inspection
ID
SB 14-11-03
Date Posted
November 3, 2014
Applies To
All flying RV-12 aircraft incorporating wing kits shipped prior to December 24, 2014.
Description
RV-12 Wing Skin-to-Spar Rivet Wear
RV-12iS Notifications and Letters
ID
Date Posted
Applies To
Description
Details
ID
SL-00034
Date Posted
January 21, 2021
Applies To
RV-12 and RV-12iS with 912 ULS engines
Description
Service letter describing optional installation of available B&C voltage regulator for legacy RV-12 or RV-12iS with ULS engine only
ID
SL-00022
Date Posted
November 20, 2020
Applies To
RV-12iS aircraft specified in the service letter
Description
Covers inspection and where applicable, the addition of a spacer washer to the RV-12iS flaperon torque tube assembly
ID
SL-00030
Date Posted
November 10, 2020
Applies To
RV-12 and RV-12iS (all, optional)
Description
Covers installation of optional Grove wheels and brakes for RV-12 and RV-12iS
ID
SL-00024
Date Posted
October 30, 2020
Applies To
RV-12 and RV-12iS
Description
Revision 1: Modified and clarified time of compliance details; Clarified steps.
Instructs owners/builders on the requirement to complete a dynamic balance of the propeller on the RV-12/RV-12iS.
ID
SL-00016
Date Posted
August 25, 2020
Applies To
RV-12 and RV-12iS
Description
Allows owners of Garmin-equipped aircraft to install the Garmin Autopilot Servo Option. Also allows optional installation of GMC 305, GMC 307, or GMC 507 Autopilot Control Modules.
ID
SL-00004
Date Posted
May 14, 2020
Applies To
RV-12iS
Description
Improved fuel system sealing washer
ID
SL-00012
Date Posted
May 5, 2020
Applies To
RV-12iS with Garmin Nav/Com (IFR) Avionics Kit
Description
Connect Garmin GA 26 GPS Antenna to MFD
ID
SL-00011
Date Posted
May 5, 2020
Applies To
RV-12 and RV-12iS (all, optional)
Description
Optional RV-12iS Cockpit Light Dimmer Kit installation in RV-12 or RV-12iS
ID
SL-00010
Date Posted
May 5, 2020
Applies To
RV-12 and RV-12iS (all, optional)
Description
Optional Aithre Shield EX 3.0 Carbon Monoxide Detector
ID
SL-00009
Date Posted
May 5, 2020
Applies To
RV-12iS with WH-00133, WH-00134, or WH-00136 harnesses shipping prior to Jan. 6, 2020.
Description
912iS Maintenance Port Wiring Update
ID
SL 19-12-31
Date Posted
February 3, 2020
Applies To
RV-12 and RV-12iS (all, optional)
Description
Service Letter allowing installation of Sensenich three-blade propeller on RV-12 and RV-12iS aircraft.
ID
SL 19-10-30
Date Posted
January 15, 2020
Applies To
RV-12iS
Description
Allows installation of optional "blade style" throttle grip in RV-12iS aircraft
ID
N 19-02-28
Date Posted
December 24, 2019
Applies To
RV-12 and RV-12iS
Description
Gun drilled gear legs: Allows original style gear legs to be replaced or upgraded to gun-drilled legs used on current aircraft/kits.
ID
N 18-10-19
Date Posted
December 24, 2019
Applies To
RV-12iS
Description
Garmin G3X Touch Dual Display option - allows the installation of a second co-pilot EFIS screen. Originally published 10/19/2018.
ID
N 18-10-18
Date Posted
December 24, 2019
Applies To
RV-12iS
Description
SkyView Dual Display option - allows the installation of a second co-pilot EFIS screen. Originally published 10/18/2018.
ID
N 18-11-15
Date Posted
December 24, 2019
Applies To
RV-12iS
Description
Dynon dual-axis autopilot - allows the installation of the Skyview Autopilot Servo option and the AP/Knobs Panel option. Originally released 10/15/2018.
ID
N 18-11-14
Date Posted
December 24, 2019
Applies To
RV-12 and RV-12iS
Description
Garmin dual-axis autopilot - allows the installation of the Garmin Autopilot Servo Option and GMC 305 or GMC 307 AP Control Heads. Originally released 10/14/2018.
ID
N 19-10-16
Date Posted
October 29, 2019
Applies To
RV-12 and RV-12iS
Description
Describes installation of optional RV-12/12iS step plugs
ID
N 19-09-03
Date Posted
October 21, 2019
Applies To
RV-12iS
Description
New Item: Optional RV-12iS Oil Cooler Winterization Kit
ID
N 16-10-10
Date Posted
March 11, 2019
Applies To
RV-12, RV-12iS
Description
Wing Tip Light and Landing Light Option - Revised to include changes made for updated lighting kits/wire harnesses for RV-12 and RV-12iS March 2019.
ID
N 18-07-12
Date Posted
July 12, 2018
Applies To
RV-12, RV-12iS
Description
Change to higher pressure rating aux. fuel pump
ID
N 16-12-14
Date Posted
February 1, 2017
Applies To
RV-12, RV-12iS
Description
Angle-Of-Attack Installation
RV-12iS Revisions and Changes
Note: The date in a document’s title will not be the same as the date on which the document is posted. Drawing date represents the date the change was proposed/started. Date posted represents the completion/release date. Some revisions take longer than others to complete. Reasons include complexity, discovery of additional items needing revision, dependencies on other changes, validation/testing, parts fabrication, etc.
Document Key:
KAI = Kit Assembly Instructions (Number in title indicates the plans section number)
MM = Maintenance Manual
POH = Pilot Operating Handbook
PAP = Production Acceptance Procedures
FTS = Flight Training Supplement
ID
Date Posted
Applies To
Description
Details
ID
46iS
Date Posted
March 17, 2021
Applies To
RV-12iS with Rotax 912 iS engine
Description
Change to starter cable part number: WH-P158 replaces WH-P155.
ID
MM RV-12iS
Date Posted
February 26, 2021
Applies To
RV-12iS
Description
Updated to v3.7, revises inspection schedule for Fuel Tank Finger Strainer and AOA System testing information.
ID
42CiS/U
Date Posted
January 22, 2021
Applies To
RV-12iS
Description
Changes related to B&C voltage regulator
ID
46U
Date Posted
January 22, 2021
Applies To
RV-12iS with ULS engine
Description
Changes related to B&C voltage regulator
ID
42MiS/U
Date Posted
January 22, 2021
Applies To
RV-12iS
Description
Changes related to B&C voltage regulator
ID
50iS/U
Date Posted
December 23, 2020
Applies To
RV-12iS
Description
Added information to assembly instructions to help ensure exhaust clearance to coolant hoses
ID
48iS-U
Date Posted
December 22, 2020
Applies To
RV=12iS
Description
Reflects improved design for the cylinder #1 & #2 exhaust assemblies
ID
37iS/U
Date Posted
December 22, 2020
Applies To
RV-12iS
Description
Changes related to new oil door bushing and parts
ID
36iS/U
Date Posted
November 10, 2020
Applies To
RV-12 and RV-12iS (all, optional)
Description
Updated to reflect available Grove wheels and brakes option
ID
35iS/U
Date Posted
November 10, 2020
Applies To
RV-12 and RV-12iS (all, optional)
Description
Updated to reflect available Grove wheels and brakes option
ID
04iS/U
Date Posted
November 6, 2020
Applies To
RV-12iS
Description
Section 4 for RV-12iS - Parts Index update
ID
49U
Date Posted
October 6, 2020
Applies To
RV-12iS
Description
Changes made related to new throttle return spring retainer part for ULS engine only
ID
44BiS
Date Posted
October 6, 2020
Applies To
RV-12iS
Description
Replaced Garmin GMC 307 with Garmin GMC 507 Autopilot Control Module (Garmin Automatic Flight Control System (AFCS) Mode Controller).
ID
42NiS
Date Posted
October 6, 2020
Applies To
RV-12iS
Description
Wiring harness change related to Garmin GMC 507 Autopilot Control Module
ID
11iS-U
Date Posted
October 6, 2020
Applies To
RV-12 and RV-12iS
Description
Added instructions to ensure threadlock fluid is properly applied and to test-run servo before installation.
ID
42PiS_12iS
Date Posted
October 6, 2020
Applies To
RV-12iS
Description
Updated with changes related to GTN 650 rev
ID
53BiS/U
Date Posted
October 6, 2020
Applies To
RV-12iS with Garmin ADS-B In not already installed
Description
Updated with changes related to wiring harness callout
ID
27iS
Date Posted
May 14, 2020
Applies To
RV-12iS
Description
Changed fuel system sealing washer
ID
40iS-U
Date Posted
May 5, 2020
Applies To
RV-12iS
Description
Minor changes made to harness part number call-out
ID
47AiS/U
Date Posted
February 3, 2020
Applies To
RV-12 and RV-12iS (all, optional)
Description
New section - covers the installation of an optional three-blade Sensenich propeller on RV-12 or RV-12iS. See also Service Letter SL 19-12-31.
ID
23iS/U
Date Posted
November 21, 2019
Applies To
RV-12iS
Description
Added drawings and instructions for installation of new vent knob (Order P/N 'BAG 3116' to receive components needed to add to existing vents)
ID
55iS/U
Date Posted
October 21, 2019
Applies To
RV-12iS
Description
New section: Oil Cooler Winterization Kit for the RV-12iS (optional)
ID
12iS/U
Date Posted
October 1, 2019
Applies To
All RV-12/12iS aircraft with Finish Kits shipped on or after 02/05/2019
Description
Update for Garmin IFR avionics kit option
ID
01iS/U
Date Posted
October 1, 2019
Applies To
RV-12iS
Description
Update for Garmin IFR avionics kit option
ID
53AiS/U
Date Posted
March 7, 2019
Applies To
RV-12iS with Dynon ADS-B In not already installed
Description
Change to spacer and assembly instructions
ID
29iS/U
Date Posted
March 7, 2019
Applies To
RV-12iS
Description
Changes Made to order of egress handle assembly step, minor hardware adjustment.
ID
28iS/U
Date Posted
February 14, 2019
Applies To
RV-12iS
Description
Updated for gun-drilled gear legs
ID
03iS/U 02
Date Posted
February 14, 2019
Applies To
RV-12iS
Description
Changes Made, Page 02
ID
12
Date Posted
December 17, 2018
Applies To
All RV-12/12iS aircraft with Finish Kits shipped prior to 02/05/2019
Description
Changes Made
ID
17
Date Posted
December 17, 2018
Applies To
All RV-12/12iS aircraft
Description
Changes Made: Page 17-02
ID
37iS/U
Date Posted
May 10, 2018
Applies To
RV-12iS
Description
Changes Made Superceded by version posted 12/17/2018