50iS/U

Added information to assembly instructions to help ensure exhaust clearance to coolant hoses; Improved instructions.

Changelog

• 05/06/2021

  REASON FOR REVISION: Add improved installation sequence for Cylinder #1 exhaust assembly.

  REVISION DESCRIPTION:

  KAI Page 50iS/U-04 REV 4:

  • In Step 9, “…as shown in the detail view in Figure 3, then adjust the clocking of the upper segment of the EX-00021-1 as necessary to ensure the clearance shown while maintaining a minimum of 1 in. [25.4 mm] engagement in both EX-00021-1 slip joints.” was “…as shown in the detail view in Figure 3. Adjust the clocking of the upper segment of the EX-00021-1 as necessary to ensure the clearance shown.”
  • Added Step 10 “…, then torque the exhaust stud nuts to the value found in the Rotax 912iS Installation Manual, Section 78-00-00.”
• 12/23/2020

  REASON FOR REVISION:

  Add information to ensure exhaust clearance to coolant hoses.

  REVISION DESCRIPTION / NEW DOCUMENTATION:

  • KAI Page 50iS/U-04 REV 3: Added Step 9.
  • Added detail view to Figure 3, moved Figure 3 and adjusted line breaks in text.

  RELATED SERVICE INFORMATION DOCUMENTATION:

  • Referred to in SB-00013 (Step 9): Cracking of the EX-00021 Cylinder #1 and EX-00022-1 Cylinder #2 exhausts