Spinner Kits for Fixed Pitch and Constant Speed
Spinner kits are part of the Finish Kits. However, should you upgrade to a constant speed prop, or change from a wood to a metal prop, then you may need one of these kits. Kits include front and rear bulkheads, hardware, and fiberglass spinner bowl. Individual spinner parts are available in the webstore. The three kits are:
- SPINNER, C/S-13: The standard spinner kit for all constant speed models, except some composite type propellers. The rear bulkhead is 13" diameter, the front 7 7/8". The spinner bowl and rear bulkhead are the same components used on the fixed pitch models.
- SPINNER, FP-13: The standard spinner kit for all wood prop fixed pitch installations since 1995. The rear bulkhead is 13" diameter, the front 10 7/8"
- SPINNER, FP-13 SEN: The standard spinner kit for the Sensenich metal props which are typically thinner than wood prop hubs. The rear bulkhead is 13" in diameter, the front 11 3/16".
Older RV-3 & 4 kits (prior to 1995) used spinners with a 12" rear bulkhead. These are no longer available.