Control Cables Vernier and Quadrant Style Control Cables. Several Sizes, Styles, and Applications. Engine control cables are available in vernier and push-pull styles. Several different lengths are available so try to measure your application before ordering. Routing will make a difference. The length of the cable is measured from tip-to-tip on the quadrant cables (CT Q-XX) or from the mounting surface of the vernier style cable (CT V-XX) to the tip of the cable when the control is in the forward position. All cables are "bulkhead mounted". This means the outer sheathing is captured on each end with nuts. A swivel of about 15 degrees allows the ends to flex without wearing the cable.
	Quadrant Cables Cables with 10-32 Thread on Each End
	Vernier & Push-Pull Panel Mount Cables Cables with Knobs on Cockpit End
	Simple Detented Push-Pull Cables Cables for Carb Heat, Cabin Heat, Mixture, etc.
	Throttle / Mixture Cable Bracket Supports Cables at Engine Attach
	Governor Cable Bracket For Constant Speed Prop Control Cable
	Spherical Metal Grommets Bulkhead Fittings for Control Cables or Wiring
	Cable Fittings and Throttle Quadrants Fittings to attach cable ends to items controlled; throttle quadrants.
	Rod End Bearings and Hardware Ends for the Firewall Fwd End of Cable
	Clevis Fittings Attaches Cabin End of Cables to Quadrant
	Wire Nut Kit Termination End for Bowden Type Cables
	Throttle Quadrants 2 and 3 Lever Versions Available
	RV-8/8A Deluxe Throttle Quadrants CT 83F DELUXE - 3 Lever CT 82F DELUXE - 2 Lever
	RV-10 Throttle Quadrant Kit Deluxe Three Lever Quadrant Kit

Return to Catalog Main Menu

	Search for an item and order the item here using a key word or exact part number.
	Search in: Accessories Catalog  "The List"

For better search results:

• Use short search phrases like single words or whole part numbers
• Use the singular form of a word (i.e. "Rivet" as opposed to "Rivets")